SmartCare Tile Cleaner

Product description

Leakproofs by Betterwork specifies and applies SmartCare Tile Cleaner as part of a complete waterproofing system. A material on its own does not stop a leak — what stops it is the right material chosen for the right defect, on a surface that has been properly prepared. That is why we deep-scan before we specify.

Where SmartCare Tile Cleaner is used

This product is specified for tiling, bathroom.

• Removing grout haze after tiling
• Cleaning tiled terraces before a tile coat
• Removing cement residue from finished tiling
• Routine maintenance of tiled wet areas

Suitable substrates: Ceramic, Vitrified, Porcelain.

How it is applied

Applied per the instructions and rinsed thoroughly. Testing on a small area first is worth the two minutes on natural stone and on older glazes.

Preparation is the part that decides whether the system lasts. Loose material and failed old coatings are removed, cracks are cut and filled, and the surface is cleaned and brought to the moisture condition the product requires before anything is applied. Skipping that stage is the single most common reason waterproofing fails in its first season, whichever brand is on the tin.

Key properties

• Removes grout haze and cement residue
• Ready to use
• Part of surface preparation before coating tiles
• Suited to routine maintenance
• Test on natural stone before general use

Technical data

Related waterproofing services

We apply SmartCare Tile Cleaner as part of the following services:

• Bathroom & wet-area waterproofing

Asian Paints SmartCare and its product names are trademarks of their respective owner. Leakproofs by Betterwork works as an Asian Paints partner. Product information on this page is provided to help you choose a system; always refer to the manufacturer’s current technical data sheet before use.