Skip to content
Leakproofs by Betterwork

Leakage Repair

Terrace, roof & bathroom leakage repair in Pune — inspected with deep-scan technology and backed by a 10-year warranty.

  • Free site inspection
  • Written estimate
  • Warranty-backed work
  • Warranty-backed

    Written warranty on every completed treatment.

  • Root-cause repair

    We trace the source, not just the visible patch.

  • Fixed written quote

    Priced before we start. No surprises later.

Professional Leakage Repair in Pune & PCMC

Active leak? We trace the entry point with deep-scanning equipment and repair it — terrace, roof, bathroom, wall or slab.

Leakproofs by Betterwork has been carrying out this work across Pune and Pimpri-Chinchwad for more than 10 years. Every job starts with a free deep-scan inspection, because the point where water appears is very often not the point where it enters.

Common problems we find

Almost every leakage repair we are called to has already been attempted at least once. The pattern is consistent: the visible stain was treated, the actual entry point was not found, and the leak returned in the next monsoon.

  • The stain is not the source. Water entering a slab travels along the top of the reinforcement, along a service conduit or down a shaft, and emerges at the lowest or weakest point in the ceiling below — often several metres from where it got in. Treating the stain treats the exit.
  • Plumbing mistaken for envelope, and the reverse. A ceiling leak that continues through a dry fortnight is plumbing. One that appears only within hours of heavy rain is envelope. One that does both is usually two separate defects, which is why the first repair “half worked”.
  • Ceiling leakage below a terrace or a bathroom. The two most common presentations in Pune apartments, and the two most commonly patched from below. Sealing a ceiling from underneath pushes the water sideways; it does not stop it.
  • Cracks that were painted, not repaired. A live structural or shrinkage crack bridged with putty and paint reopens with the first thermal cycle.
  • Spalling concrete with exposed reinforcement. By this stage the leak has been running long enough to corrode steel, and the repair is a structural one with a waterproofing component, not the other way round.
  • Leaks between flats. Water from the flat above, a shared wall, or a common service shaft — technically straightforward, but it needs the source flat’s cooperation and, in a society, a decision about who pays.

The cost of a wrong diagnosis is the entire repair, twice. That is why we sell the inspection as the product and the repair as the consequence.

How we treat it

Leakage repair at Leakproofs by Betterwork is a diagnostic service first. We do not quote a repair until we can say where the water enters and by what path it reaches where you see it.

Survey. Thermal imaging to map the wet zone behind finishes — the thermal image shows the extent of saturation, which is usually far larger than the visible stain and points back toward the source. Moisture meter readings at depth to confirm. Isolation testing on supply and waste lines to rule plumbing in or out. Where the path is still ambiguous, controlled water testing: we wet one zone at a time — a specific terrace bay, one balcony, one bathroom — and watch below. Dye tracing where zones cannot be isolated hydraulically. This takes hours rather than minutes and it is the reason the repair works.

Preparation. Finishes are opened only where the diagnosis requires it. Cracks are cut out to a V or U profile to a sound edge rather than filled at the surface. Where reinforcement is exposed and corroded, it is cleaned to bright steel, treated, and the section reinstated with a polymer-modified repair mortar before any waterproofing is applied. Salt-contaminated plaster is cut back beyond the damp line.

Systems, matched to the diagnosis. Injection grouting — PU for active water under pressure, epoxy where the crack is structural and must be re-bonded, acrylic and cement grouts where the void is larger — priced per point, typically ₹650 to ₹1,400 depending on depth, access and grout type. Localised membrane repair and re-detailing at junctions and outlets where the source is the roof or balcony above. Negative-side crystalline treatment where the source cannot be reached from outside. Plumbing correction where that is what the test found.

Verification. We repeat the water test that originally reproduced the leak, on the same zone, and observe the same location. If it stays dry, the repair is proven; if it does not, we are still on site. Eligible completed work carries the written warranty on the treated area.

Material options

As an authorized Dr. Fixit applicator and an Asian Paints and Birla Opus Paint partner, we can apply the system that best suits your property, budget and expected durability.

10-year warranty

Eligible projects are water-tested before handover and covered by a written 10-year warranty on the treated area.

How we carry out the work

  1. 1

    Free site inspection

    An engineer visits at a time that suits you, examines the affected area and traces where the water is actually entering.

  2. 2

    Diagnosis & written estimate

    You get a clear explanation of the cause, the treatment we recommend, and a fixed written price before any work begins.

  3. 3

    Surface preparation

    Cracks are cut and filled, loose material removed and the surface cleaned. Skipping this is why most waterproofing fails.

  4. 4

    Application & curing

    The chosen system is applied in the specified number of coats, with the correct curing time allowed between each.

  5. 5

    Water testing & handover

    We flood-test or water-test the treated area, walk you through the result, and issue your warranty document.

Frequently asked questions

How much does terrace waterproofing cost in Pune per sq ft?
Terrace waterproofing in Pune typically runs between ₹55 and ₹130 per square foot. The rate depends on the system specified — an acrylic or cementitious coating sits at the lower end, while APP membrane, PU and epoxy systems cost more but last longer. Surface condition matters too: if a failed layer has to be removed or cracks cut and filled first, that preparation is part of the price. Use our cost calculator for an indicative range, or book a free inspection for a written quotation.
Who are the most reliable waterproofing contractors in Pune with a warranty?
Look for three things before hiring: a written warranty rather than a verbal promise, a documented inspection before any quotation, and manufacturer authorisation for the materials being applied. Leakproofs by Betterwork issues a 10-year written warranty on eligible projects, carries out a deep-scan inspection with a detailed report before quoting, and is an authorised Dr. Fixit applicator as well as an Asian Paints and Birla Opus Paint partner, with 10+ years of work across Pune and PCMC.
What is the best permanent solution for bathroom water leakage in Pune flats?
In most Pune flats the leak comes from the sunk slab beneath the bathroom, not the visible tiles. A permanent fix means opening the sunk portion, repairing the concealed plumbing if it has failed, applying a fresh waterproofing membrane across the slab and up the walls, then flood-testing before refilling. Surface sealants and grout repairs treat the symptom and typically fail within a season. In some cases the sunk slab can be treated without breaking the floor tiles — the inspection determines whether that is possible on your bathroom.
Which waterproofing method is best for heavy rainfall areas like Pune?
For Pune's monsoon, exposed terraces and roofs do best with a UV-stable elastomeric or APP membrane system that can handle thermal movement without cracking. Basements under groundwater pressure need a negative-side or crystalline treatment rather than a surface coating. External walls facing the prevailing rain benefit from a breathable water-repellent coating that sheds water while letting trapped moisture escape. The correct choice depends on exposure and the condition found during inspection — there is no single method that suits every surface.
What causes roof leakage during the Pune monsoon?
The common causes are shrinkage cracks in the slab or screed, failed or aged waterproofing coating, blocked rainwater outlets causing ponding, defective parapet and slab junctions, and gaps around pipe penetrations. Water frequently travels along the slab before appearing inside, so the damp patch on your ceiling is often some distance from the actual entry point. That is why we deep-scan to locate the source rather than treating the visible stain.
Can you recommend a professional waterproofing company near Baner or Wakad, Pune?
Leakproofs by Betterwork works across West Pune including Baner, Wakad, Hinjewadi, Aundh, Balewadi, Bavdhan, Pashan and Kothrud, as well as East Pune, South and Central Pune, and the whole of Pimpri-Chinchwad. Inspections in these areas are usually scheduled within two to three days, and the visit, the deep-scan survey and the written report are free with no obligation.
How do I permanently treat wall dampness and seepage?
First identify which kind of damp you have. Rising damp travels up from the plinth and shows as a tide mark near the floor with salt deposits. Lateral seepage comes through an external or shared wall and appears as patches that worsen after rain. Condensation collects on cold surfaces in poorly ventilated rooms. Each needs a different treatment, and repainting over any of them without addressing the source simply moves the problem a few months down the line.
How long does waterproofing work take?
Most residential jobs finish in two to five working days, depending on the treated area and the curing time each coat requires. Bathroom work needs that bathroom out of use while the system cures. Larger commercial and industrial projects are scheduled in phases so the building keeps operating. We confirm the schedule in writing before starting.
Is the site inspection really free?
Yes. An engineer visits, deep-scans the affected area to map moisture and locate the source of the leak, and gives you a detailed written report with a recommended treatment and a fixed estimate. There is no charge and no obligation to proceed.
What does the 10-year warranty cover?
Eligible completed projects are covered by a written 10-year warranty on the treated area. The work is water-tested in front of you before handover. If a covered issue arises during the warranty period we provide repair support according to the agreed warranty terms, which are stated on your estimate before you approve it.

Our clients

Trusted by leading companies across Pune & PCMC

IT, automobile, FMCG, pharmaceutical, construction and architectural clients.

  • IT & Technology
  • Automobile
  • FMCG
  • Pharmaceutical
  • Construction & Infrastructure
  • Architects & Consultants

Got a leak? Book a free site inspection.

Our engineers assess the source of the leakage, explain the right treatment, and give you a written estimate — with no obligation.

Explore everything we do

Every service, treatment and locality we cover across Pune & PCMC.

Call Now WhatsApp
I need waterproofing
10+ years across Pune & PCMC
10+ years across Pune & PCMC Trained in-house crews — 25+ professionals, not subcontracted labour.

Free inspection

Get a Quote in 30 Seconds

Tell us where the leak is. We will call you back and book a free deep-scan inspection — no obligation.











    Indian mobile number, 10 digits, no spaces.




    We reply within one working day. Your details are used only to contact you about this enquiry.

    Prefer to talk? +91 96376 90999