SmartCare CemBoost 200

Product description

Leakproofs by Betterwork specifies and applies SmartCare CemBoost 200 as part of a complete waterproofing system. A material on its own does not stop a leak — what stops it is the right material chosen for the right defect, on a surface that has been properly prepared. That is why we deep-scan before we specify.

Where SmartCare CemBoost 200 is used

This product is specified for concrete, walls.

• Strengthening site-batched plaster and mortar
• Repair mixes on interior and exterior walls
• Plaster on elevations exposed to driven rain
• Improving water resistance of a cement mix

Suitable substrates: Concrete, Mortar, Plaster.

How it is applied

Gauged into the mix at the dosage specified in the current data sheet, measured rather than estimated.

Preparation is the part that decides whether the system lasts. Loose material and failed old coatings are removed, cracks are cut and filled, and the surface is cleaned and brought to the moisture condition the product requires before anything is applied. Skipping that stage is the single most common reason waterproofing fails in its first season, whichever brand is on the tin.

Key properties

• Improves strength of cement mixes
• Reduces permeability of plaster and mortar
• Interior and exterior use
• Compatible with the SmartCare repair range
• Dosage by data sheet, not by eye

Technical data

Related waterproofing services

We apply SmartCare CemBoost 200 as part of the following services:

• Leakage repair
• Wall waterproofing

Asian Paints SmartCare and its product names are trademarks of their respective owner. Leakproofs by Betterwork works as an Asian Paints partner. Product information on this page is provided to help you choose a system; always refer to the manufacturer’s current technical data sheet before use.