Alldry Wall n Roof 10

Product description

Leakproofs by Betterwork specifies and applies Alldry Wall n Roof 10 as part of a complete waterproofing system. A material on its own does not stop a leak — what stops it is the right material chosen for the right defect, on a surface that has been properly prepared. That is why we deep-scan before we specify.

Where Alldry Wall n Roof 10 is used

This product is specified for walls, roof, terrace.

• Independent houses being waterproofed end to end
• Flat RCC roofs and the elevations below them
• Parapets, which are genuinely both wall and roof
• Combined waterproofing and repainting on a single system

Suitable substrates: Plaster, Masonry, RCC.

How it is applied

Applied over cleaned, crack-treated and primed surfaces in the specified coats, with reinforcement at junctions and over treated cracks. Ponding on the roof is corrected before coating.

Preparation is the part that decides whether the system lasts. Loose material and failed old coatings are removed, cracks are cut and filled, and the surface is cleaned and brought to the moisture condition the product requires before anything is applied. Skipping that stage is the single most common reason waterproofing fails in its first season, whichever brand is on the tin.

Key properties

• Single product for both wall and roof
• Elastomeric and crack bridging
• UV resistant for exposed surfaces
• Simplifies specification on small jobs
• Manufacturer warranty terms per the data sheet

Technical data

Related waterproofing services

We apply Alldry Wall n Roof 10 as part of the following services:

• Wall waterproofing
• Roof waterproofing
• Terrace waterproofing

Birla Opus and its product names are trademarks of their respective owner. Leakproofs by Betterwork works as a Birla Opus Paint partner. Product information on this page is provided to help you choose a system; always refer to the manufacturer’s current technical data sheet before use.