SmartCare Vitalia Neo

Product description

Leakproofs by Betterwork specifies and applies SmartCare Vitalia Neo as part of a complete waterproofing system. A material on its own does not stop a leak — what stops it is the right material chosen for the right defect, on a surface that has been properly prepared. That is why we deep-scan before we specify.

Where SmartCare Vitalia Neo is used

This product is specified for walls, cracks.

• Making good uneven or damaged plaster
• Filling and levelling after crack treatment
• Bathroom and wet-area substrate preparation
• General repair ahead of a coating system

Suitable substrates: Plaster, Masonry, Concrete.

How it is applied

Mixed to the specified consistency and applied in controlled thicknesses to a clean, sound substrate, cured properly rather than left to dry out in the sun.

Preparation is the part that decides whether the system lasts. Loose material and failed old coatings are removed, cracks are cut and filled, and the surface is cleaned and brought to the moisture condition the product requires before anything is applied. Skipping that stage is the single most common reason waterproofing fails in its first season, whichever brand is on the tin.

Key properties

• Repairs and levels in one product
• Suited to interior and exterior use
• Compatible with the SmartCare coating range
• Used across walls, joints and wet areas
• Applied within the specified thickness range

Technical data

Related waterproofing services

We apply SmartCare Vitalia Neo as part of the following services:

• Wall waterproofing
• Cracks in walls and slabs

Asian Paints SmartCare and its product names are trademarks of their respective owner. Leakproofs by Betterwork works as an Asian Paints partner. Product information on this page is provided to help you choose a system; always refer to the manufacturer’s current technical data sheet before use.