Skip to content
Leakproofs by Betterwork
Bosch GIS 1000 C Professional — Thermo detector

Bosch

Bosch GIS 1000 C Professional

Thermo detector

The Bosch GIS 1000 C Professional is a thermo detector that reads surface temperature alongside ambient humidity, and flags conditions where condensation and mould are likely. It sits between a spot thermometer and a full thermal camera, and it is the instrument that answers the question a camera raises.

Diagnostic Cordless Indoor Outdoor
Product specification
Brand Bosch
Product type Thermo detector
Chemistry Infrared surface temperature with humidity sensing
Supplied as Cordless, battery powered
Substrates Plaster, Masonry, RCC, Tile
Applications Walls, Damp walls, Bathroom, Terrace
Pack size & coverage Per the manufacturer’s current data sheet — ask us for the TDS

Buy on Amazon opens Amazon.in in a new tab. We may earn a commission on qualifying purchases at no extra cost to you. Confirm pack size, grade and current price on Amazon before ordering — we do not control listings or stock.

Product description

Leakproofs by Betterwork specifies and applies Bosch GIS 1000 C Professional as part of a complete waterproofing system. A material on its own does not stop a leak — what stops it is the right material chosen for the right defect, on a surface that has been properly prepared. That is why we deep-scan before we specify.

Where Bosch GIS 1000 C Professional is used

This product is specified for walls, damp walls, bathroom, terrace.

  • Confirming a cold spot found with a thermal camera
  • Assessing condensation and mould risk in a poorly ventilated room
  • Spot-checking damp across a wall in a grid pattern
  • Checking surface conditions before applying a coating
  • Comparing readings between a suspect area and a known-dry reference

Suitable substrates: Plaster, Masonry, RCC, Tile.

How it is applied

Readings are taken as a grid across the suspect area and against a dry reference point on the same wall, because an absolute number means little on its own — it is the difference between wet and dry areas of the same construction that identifies the problem.

Preparation is the part that decides whether the system lasts. Loose material and failed old coatings are removed, cracks are cut and filled, and the surface is cleaned and brought to the moisture condition the product requires before anything is applied. Skipping that stage is the single most common reason waterproofing fails in its first season, whichever brand is on the tin.

Key properties

  • Surface temperature plus ambient humidity in one instrument
  • Flags condensation and mould risk conditions
  • Stores readings for the inspection record
  • Faster and cheaper than a thermal camera for spot work
  • Point measurement — it does not survey an area the way a camera does

Technical data

Pack sizes, coverage, cure times, colours and current pricing for Bosch GIS 1000 C Professional are taken from the manufacturer’s current technical data sheet.

Formulations, pack sizes and regional availability change, so we quote against the data sheet in force on the day rather than a figure copied from a website. Ask us for the current TDS and SDS for this product and we will send them with your estimate.

Related waterproofing services

We apply Bosch GIS 1000 C Professional as part of the following services:

Free inspection & written estimate

Get Bosch GIS 1000 C Professional specified for your building

Book a free deep-scan inspection. We identify what is actually causing the leak, then recommend the material system that fits — with a fixed written estimate before any work begins.

Bosch and its product names are trademarks of their respective owner. Bosch tools are equipment we use on site. We are not a Bosch dealer, and links to buy them go to Amazon. Product information on this page is provided to help you choose a system; always refer to the manufacturer’s current technical data sheet before use.

Got a leak? Book a free site inspection.

Our engineers assess the source of the leakage, explain the right treatment, and give you a written estimate — with no obligation.

Explore everything we do

Every service, treatment and locality we cover across Pune & PCMC.

Call Now WhatsApp
I need waterproofing
10+ years across Pune & PCMC
10+ years across Pune & PCMC Trained in-house crews — 25+ professionals, not subcontracted labour.

Free inspection

Get a Quote in 30 Seconds

Tell us where the leak is. We will call you back and book a free deep-scan inspection — no obligation.











    Indian mobile number, 10 digits, no spaces.




    We reply within one working day. Your details are used only to contact you about this enquiry.

    Prefer to talk? +91 96376 90999