Bosch D-tect 120 Professional

Product description

Leakproofs by Betterwork specifies and applies Bosch D-tect 120 Professional as part of a complete waterproofing system. A material on its own does not stop a leak — what stops it is the right material chosen for the right defect, on a surface that has been properly prepared. That is why we deep-scan before we specify.

Where Bosch D-tect 120 Professional is used

This product is specified for walls, concrete, bathroom.

• Checking a wall before chasing for crack repair
• Locating pipework in a floor before opening a sunk slab
• Finding rebar before fixing into an RCC element
• General service detection during renovation work

Suitable substrates: RCC, Masonry, Drywall.

How it is applied

Calibrated on the surface being scanned, then swept in overlapping passes with findings marked directly on the wall. Scan depth depends on the material, so a reading on dense concrete is interpreted differently from one on drywall.

Preparation is the part that decides whether the system lasts. Loose material and failed old coatings are removed, cracks are cut and filled, and the surface is cleaned and brought to the moisture condition the product requires before anything is applied. Skipping that stage is the single most common reason waterproofing fails in its first season, whichever brand is on the tin.

Key properties

• Detects metal, live wiring and plastic pipes
• Compact and quick to deploy on site
• Cordless operation on the Bosch battery platform
• Suited to renovation and repair work
• Shallower detection depth than the larger radar scanner

Technical data

Related waterproofing services

We apply Bosch D-tect 120 Professional as part of the following services:

• Wall waterproofing
• Leakage repair
• Bathroom waterproofing

Bosch and its product names are trademarks of their respective owner. Bosch tools are equipment we use on site. We are not a Bosch dealer, and links to buy them go to Amazon. Product information on this page is provided to help you choose a system; always refer to the manufacturer’s current technical data sheet before use.