Skip to content
Leakproofs by Betterwork

Dr. Fixit Micro Concrete

Structural concrete repair from Dr. Fixit — specified and applied by Leakproofs by Betterwork, with a 10-year warranty on eligible work.

  • Free site inspection
  • Written estimate
  • Warranty-backed work
  • Warranty-backed

    Written warranty on every completed treatment.

  • Root-cause repair

    We trace the source, not just the visible patch.

  • Fixed written quote

    Priced before we start. No surprises later.

Dr. Fixit Micro Concrete is a flowable, shrinkage-compensated concrete for structural repairs too deep to patch by hand. It is poured into formwork rather than trowelled on, which is what lets it fill fully around congested reinforcement.

Leakproofs by Betterwork specifies and applies Dr. Fixit Micro Concrete as part of a complete waterproofing system. A material on its own does not stop a leak — what stops it is the right material chosen for the right defect, on a surface that has been properly prepared. That is why we deep-scan before we specify.

Brand
Dr. Fixit
Product type
Structural concrete repair
Chemistry
Flowable cementitious micro-concrete
Form
Powder, site mixed
Surfaces
RCC, Concrete
Applications
Concrete
Dr. Fixit Micro Concrete applied during waterproofing work
Dr. Fixit Micro Concrete in use — applied to the manufacturer’s specification.

Where Dr. Fixit Micro Concrete is used

This product is specified for concrete.

  • Deep structural repairs to columns, beams and slabs
  • Jacketing and section enlargement
  • Repairs where reinforcement is congested and hand packing would leave voids
  • Reinstating cover concrete lost to long-term corrosion

Suitable substrates: RCC, Concrete.

How it is applied

Shuttering is fixed around the cut-back area and the mix is poured or pumped in, filling from the lowest point so air is displaced upward. Exposed reinforcement is cleaned and treated first. Curing is not optional on a structural repair and is carried out for the full period the data sheet specifies.

Preparation is the part that decides whether the system lasts. Loose material and failed old coatings are removed, cracks are cut and filled, and the surface is cleaned and brought to the moisture condition the product requires before anything is applied. Skipping that stage is the single most common reason waterproofing fails in its first season, whichever brand is on the tin.

Key properties

  • Flows into congested reinforcement without voids
  • Shrinkage compensated so it stays in contact with the parent concrete
  • Suited to structural, load-carrying repairs
  • Placed by pour or pump into formwork
  • Higher strength than hand-applied repair mortars

Technical data

Pack sizes, coverage, cure times, colours and current pricing for Dr. Fixit Micro Concrete are taken from the manufacturer’s current technical data sheet.

Formulations, pack sizes and regional availability change, so we quote against the data sheet in force on the day rather than a figure copied from a website. Ask us for the current TDS and SDS for this product and we will send them with your estimate.

Related waterproofing services

We apply Dr. Fixit Micro Concrete as part of the following services:

Free inspection & written estimate

Get Dr. Fixit Micro Concrete specified for your building

Book a free deep-scan inspection. We identify what is actually causing the leak, then recommend the material system that fits — with a fixed written estimate before any work begins.

Dr. Fixit and its product names are trademarks of their respective owner. Leakproofs by Betterwork is an authorized Dr. Fixit applicator. Product information on this page is provided to help you choose a system; always refer to the manufacturer’s current technical data sheet before use.

How we carry out the work

  1. 1

    Free site inspection

    An engineer visits at a time that suits you, examines the affected area and traces where the water is actually entering.

  2. 2

    Diagnosis & written estimate

    You get a clear explanation of the cause, the treatment we recommend, and a fixed written price before any work begins.

  3. 3

    Surface preparation

    Cracks are cut and filled, loose material removed and the surface cleaned. Skipping this is why most waterproofing fails.

  4. 4

    Application & curing

    The chosen system is applied in the specified number of coats, with the correct curing time allowed between each.

  5. 5

    Water testing & handover

    We flood-test or water-test the treated area, walk you through the result, and issue your warranty document.

Our clients

Trusted by leading companies across Pune & PCMC

IT, automobile, FMCG, pharmaceutical, construction and architectural clients.

  • IT & Technology
  • Automobile
  • FMCG
  • Pharmaceutical
  • Construction & Infrastructure
  • Architects & Consultants

Got a leak? Book a free site inspection.

Our engineers assess the source of the leakage, explain the right treatment, and give you a written estimate — with no obligation.

Explore everything we do

Every service, treatment and locality we cover across Pune & PCMC.

Call Now WhatsApp
I need waterproofing
10+ years across Pune & PCMC
10+ years across Pune & PCMC Trained in-house crews — 25+ professionals, not subcontracted labour.

Free inspection

Get a Quote in 30 Seconds

Tell us where the leak is. We will call you back and book a free deep-scan inspection — no obligation.











    Indian mobile number, 10 digits, no spaces.




    We reply within one working day. Your details are used only to contact you about this enquiry.

    Prefer to talk? +91 96376 90999