Skip to content
Leakproofs by Betterwork

Dr. Fixit LW+

Integral waterproofing compound from Dr. Fixit — specified and applied by Leakproofs by Betterwork, with a 10-year warranty on eligible work.

  • Free site inspection
  • Written estimate
  • Warranty-backed work
  • Warranty-backed

    Written warranty on every completed treatment.

  • Root-cause repair

    We trace the source, not just the visible patch.

  • Fixed written quote

    Priced before we start. No surprises later.

Dr. Fixit LW+ is an integral waterproofing compound added to concrete, plaster and mortar at the mixing stage. Rather than forming a barrier on the surface, it reduces the permeability of the mix itself, so the material resists water from the day it is placed.

Leakproofs by Betterwork specifies and applies Dr. Fixit LW+ as part of a complete waterproofing system. A material on its own does not stop a leak — what stops it is the right material chosen for the right defect, on a surface that has been properly prepared. That is why we deep-scan before we specify.

Brand
Dr. Fixit
Product type
Integral waterproofing compound
Chemistry
Modified aqueous chemical
Form
Liquid
Surfaces
Concrete, Plaster, Mortar
Applications
Concrete, Walls, Basement
Dr. Fixit LW+ applied during waterproofing work
Dr. Fixit LW+ in use — applied to the manufacturer’s specification.

Where Dr. Fixit LW+ is used

This product is specified for concrete, walls, basement.

  • RCC slabs, columns and beams during construction
  • External plaster on elevations exposed to driven rain
  • Bedding mortar in brickwork and blockwork
  • Screeds laid on terraces before a coating system goes on
  • Repair concrete placed against an area with a known water problem

Suitable substrates: Concrete, Plaster, Mortar.

How it is applied

Added to the gauging water and mixed thoroughly before the mix is placed. Dosage is by cement weight and is set by the current data sheet — under-dosing gives no benefit and over-dosing affects the set, so it is measured rather than estimated on site.

Preparation is the part that decides whether the system lasts. Loose material and failed old coatings are removed, cracks are cut and filled, and the surface is cleaned and brought to the moisture condition the product requires before anything is applied. Skipping that stage is the single most common reason waterproofing fails in its first season, whichever brand is on the tin.

Key properties

  • Reduces permeability of concrete, plaster and mortar
  • Cannot be omitted later by anyone finishing the surface
  • Improves workability of the mix
  • Compatible with ordinary Portland cement mixes
  • Does not replace surface waterproofing — the two work together

Technical data

Pack sizes, coverage, cure times, colours and current pricing for Dr. Fixit LW+ are taken from the manufacturer’s current technical data sheet.

Formulations, pack sizes and regional availability change, so we quote against the data sheet in force on the day rather than a figure copied from a website. Ask us for the current TDS and SDS for this product and we will send them with your estimate.

Related waterproofing services

We apply Dr. Fixit LW+ as part of the following services:

Free inspection & written estimate

Get Dr. Fixit LW+ specified for your building

Book a free deep-scan inspection. We identify what is actually causing the leak, then recommend the material system that fits — with a fixed written estimate before any work begins.

Dr. Fixit and its product names are trademarks of their respective owner. Leakproofs by Betterwork is an authorized Dr. Fixit applicator. Product information on this page is provided to help you choose a system; always refer to the manufacturer’s current technical data sheet before use.

How we carry out the work

  1. 1

    Free site inspection

    An engineer visits at a time that suits you, examines the affected area and traces where the water is actually entering.

  2. 2

    Diagnosis & written estimate

    You get a clear explanation of the cause, the treatment we recommend, and a fixed written price before any work begins.

  3. 3

    Surface preparation

    Cracks are cut and filled, loose material removed and the surface cleaned. Skipping this is why most waterproofing fails.

  4. 4

    Application & curing

    The chosen system is applied in the specified number of coats, with the correct curing time allowed between each.

  5. 5

    Water testing & handover

    We flood-test or water-test the treated area, walk you through the result, and issue your warranty document.

Our clients

Trusted by leading companies across Pune & PCMC

IT, automobile, FMCG, pharmaceutical, construction and architectural clients.

  • IT & Technology
  • Automobile
  • FMCG
  • Pharmaceutical
  • Construction & Infrastructure
  • Architects & Consultants

Got a leak? Book a free site inspection.

Our engineers assess the source of the leakage, explain the right treatment, and give you a written estimate — with no obligation.

Explore everything we do

Every service, treatment and locality we cover across Pune & PCMC.

Call Now WhatsApp
I need waterproofing
10+ years across Pune & PCMC
10+ years across Pune & PCMC Trained in-house crews — 25+ professionals, not subcontracted labour.

Free inspection

Get a Quote in 30 Seconds

Tell us where the leak is. We will call you back and book a free deep-scan inspection — no obligation.











    Indian mobile number, 10 digits, no spaces.




    We reply within one working day. Your details are used only to contact you about this enquiry.

    Prefer to talk? +91 96376 90999