Skip to content
Leakproofs by Betterwork

Dr. Fixit Fastflex

Flexible cementitious coating from Dr. Fixit — specified and applied by Leakproofs by Betterwork, with a 10-year warranty on eligible work.

  • Free site inspection
  • Written estimate
  • Warranty-backed work
  • Warranty-backed

    Written warranty on every completed treatment.

  • Root-cause repair

    We trace the source, not just the visible patch.

  • Fixed written quote

    Priced before we start. No surprises later.

Dr. Fixit Fastflex is a two-component flexible cementitious waterproof coating. Because it is cement based it bonds into the substrate rather than sitting on it as a film, which is what makes it suitable under tiles and inside tanks where the waterproofing will be permanently buried.

Leakproofs by Betterwork specifies and applies Dr. Fixit Fastflex as part of a complete waterproofing system. A material on its own does not stop a leak — what stops it is the right material chosen for the right defect, on a surface that has been properly prepared. That is why we deep-scan before we specify.

Brand
Dr. Fixit
Product type
Flexible cementitious coating
Chemistry
Two-component polymer-modified cementitious
Form
Powder plus liquid, site mixed
Surfaces
RCC, Screed, Plaster, Masonry
Applications
Bathroom, Wet areas, Water tanks, Basement
Dr. Fixit Fastflex applied during waterproofing work
Dr. Fixit Fastflex in use — applied to the manufacturer’s specification.

Where Dr. Fixit Fastflex is used

This product is specified for bathroom, wet areas, water tanks, basement.

  • Bathroom and toilet sunk slabs before filling and tiling
  • Shower areas and wall-to-floor junctions
  • Water tanks, sumps and reservoirs
  • Basement walls treated from the inside
  • Balconies and utility areas that will be tiled over

Suitable substrates: RCC, Screed, Plaster, Masonry.

How it is applied

The powder and liquid components are mixed at the ratio given in the data sheet — this is not a product to gauge by eye — and applied by brush in two or more coats at right angles to one another. Corners, junctions and pipe penetrations are reinforced with tape before the final coat, and wet areas are flood-tested before they are filled.

Preparation is the part that decides whether the system lasts. Loose material and failed old coatings are removed, cracks are cut and filled, and the surface is cleaned and brought to the moisture condition the product requires before anything is applied. Skipping that stage is the single most common reason waterproofing fails in its first season, whichever brand is on the tin.

Key properties

  • Flexible enough to bridge fine cracks in the substrate
  • Bonds into the substrate rather than forming a loose film
  • Can be tiled over directly
  • Suitable for water-retaining structures
  • Works on both internal and external faces

Technical data

Pack sizes, coverage, cure times, colours and current pricing for Dr. Fixit Fastflex are taken from the manufacturer’s current technical data sheet.

Formulations, pack sizes and regional availability change, so we quote against the data sheet in force on the day rather than a figure copied from a website. Ask us for the current TDS and SDS for this product and we will send them with your estimate.

Related waterproofing services

We apply Dr. Fixit Fastflex as part of the following services:

Free inspection & written estimate

Get Dr. Fixit Fastflex specified for your building

Book a free deep-scan inspection. We identify what is actually causing the leak, then recommend the material system that fits — with a fixed written estimate before any work begins.

Dr. Fixit and its product names are trademarks of their respective owner. Leakproofs by Betterwork is an authorized Dr. Fixit applicator. Product information on this page is provided to help you choose a system; always refer to the manufacturer’s current technical data sheet before use.

How we carry out the work

  1. 1

    Free site inspection

    An engineer visits at a time that suits you, examines the affected area and traces where the water is actually entering.

  2. 2

    Diagnosis & written estimate

    You get a clear explanation of the cause, the treatment we recommend, and a fixed written price before any work begins.

  3. 3

    Surface preparation

    Cracks are cut and filled, loose material removed and the surface cleaned. Skipping this is why most waterproofing fails.

  4. 4

    Application & curing

    The chosen system is applied in the specified number of coats, with the correct curing time allowed between each.

  5. 5

    Water testing & handover

    We flood-test or water-test the treated area, walk you through the result, and issue your warranty document.

Our clients

Trusted by leading companies across Pune & PCMC

IT, automobile, FMCG, pharmaceutical, construction and architectural clients.

  • IT & Technology
  • Automobile
  • FMCG
  • Pharmaceutical
  • Construction & Infrastructure
  • Architects & Consultants

Got a leak? Book a free site inspection.

Our engineers assess the source of the leakage, explain the right treatment, and give you a written estimate — with no obligation.

Explore everything we do

Every service, treatment and locality we cover across Pune & PCMC.

Call Now WhatsApp
I need waterproofing
10+ years across Pune & PCMC
10+ years across Pune & PCMC Trained in-house crews — 25+ professionals, not subcontracted labour.

Free inspection

Get a Quote in 30 Seconds

Tell us where the leak is. We will call you back and book a free deep-scan inspection — no obligation.











    Indian mobile number, 10 digits, no spaces.




    We reply within one working day. Your details are used only to contact you about this enquiry.

    Prefer to talk? +91 96376 90999