Dr. Fixit Bathseal Kit
Bathroom waterproofing kit from Dr. Fixit — specified and applied by Leakproofs by Betterwork, with a 10-year warranty on eligible work.
- Free site inspection
- Written estimate
- Warranty-backed work
-
Warranty-backed
Written warranty on every completed treatment.
-
Root-cause repair
We trace the source, not just the visible patch.
-
Fixed written quote
Priced before we start. No surprises later.
Dr. Fixit Bathseal Kit supplies the coating together with the detailing components a bathroom actually needs — because bathrooms do not leak through the middle of the floor, they leak at corners, at the floor trap and where pipes pass through the slab.
Leakproofs by Betterwork specifies and applies Dr. Fixit Bathseal Kit as part of a complete waterproofing system. A material on its own does not stop a leak — what stops it is the right material chosen for the right defect, on a surface that has been properly prepared. That is why we deep-scan before we specify.
- Brand
- Dr. Fixit
- Product type
- Bathroom waterproofing kit
- Chemistry
- Polymer-modified cementitious system
- Form
- Kit — coating plus detailing components
- Surfaces
- RCC, Screed, Plaster
- Applications
- Bathroom, Wet areas

Where Dr. Fixit Bathseal Kit is used
This product is specified for bathroom, wet areas.
- Complete waterproofing of a bathroom or toilet sunk slab
- Shower enclosures including wall-to-floor junctions
- Renovation work where the sunk portion has been opened up
- Wet areas where corner and penetration detailing has previously failed
Suitable substrates: RCC, Screed, Plaster.
How it is applied
The membrane is brush applied in successive coats with the kit’s tape embedded at every internal corner and around every penetration as the coats are built up. The completed system is flood-tested before the sunk portion is filled and tiled.
Preparation is the part that decides whether the system lasts. Loose material and failed old coatings are removed, cracks are cut and filled, and the surface is cleaned and brought to the moisture condition the product requires before anything is applied. Skipping that stage is the single most common reason waterproofing fails in its first season, whichever brand is on the tin.
Key properties
- Coating and detailing components matched as one system
- Addresses the junctions where wet areas actually fail
- Tileable once cured
- Suited to both new work and renovation
- Designed to be flood-tested before covering
Technical data
Pack sizes, coverage, cure times, colours and current pricing for Dr. Fixit Bathseal Kit are taken from the manufacturer’s current technical data sheet.
Formulations, pack sizes and regional availability change, so we quote against the data sheet in force on the day rather than a figure copied from a website. Ask us for the current TDS and SDS for this product and we will send them with your estimate.
Related waterproofing services
We apply Dr. Fixit Bathseal Kit as part of the following services:
Free inspection & written estimate
Get Dr. Fixit Bathseal Kit specified for your building
Book a free deep-scan inspection. We identify what is actually causing the leak, then recommend the material system that fits — with a fixed written estimate before any work begins.
Dr. Fixit and its product names are trademarks of their respective owner. Leakproofs by Betterwork is an authorized Dr. Fixit applicator. Product information on this page is provided to help you choose a system; always refer to the manufacturer’s current technical data sheet before use.
How we carry out the work
-
1
Free site inspection
An engineer visits at a time that suits you, examines the affected area and traces where the water is actually entering.
-
2
Diagnosis & written estimate
You get a clear explanation of the cause, the treatment we recommend, and a fixed written price before any work begins.
-
3
Surface preparation
Cracks are cut and filled, loose material removed and the surface cleaned. Skipping this is why most waterproofing fails.
-
4
Application & curing
The chosen system is applied in the specified number of coats, with the correct curing time allowed between each.
-
5
Water testing & handover
We flood-test or water-test the treated area, walk you through the result, and issue your warranty document.
Our clients
Trusted by leading companies across Pune & PCMC
IT, automobile, FMCG, pharmaceutical, construction and architectural clients.
- IT & Technology
- Automobile
- FMCG
- Pharmaceutical
- Construction & Infrastructure
- Architects & Consultants
Explore related services and areas
Our services
- Terrace Waterproofing
- Roof Waterproofing
- Bathroom Waterproofing
- Wall Waterproofing
- Basement Waterproofing
- Water Tank Waterproofing
- Balcony Waterproofing
- Swimming Pool Waterproofing
Specialist treatments
- Terrace Waterproofing
- Bathroom & Toilet Waterproofing
- Basement & Underground Tank Waterproofing
- External & Internal Wall Leakage Treatment
- PU & Epoxy Coating Waterproofing
- Injection Grouting (Pressure / Chemical)
- Dampness & Seepage Treatment
- Monsoon Pre-Inspection & Leakage Detection