Skip to content
Leakproofs by Betterwork

Dr. Fixit Tile Grout

Cementitious tile grout from Dr. Fixit — specified and applied by Leakproofs by Betterwork, with a 10-year warranty on eligible work.

  • Free site inspection
  • Written estimate
  • Warranty-backed work
  • Warranty-backed

    Written warranty on every completed treatment.

  • Root-cause repair

    We trace the source, not just the visible patch.

  • Fixed written quote

    Priced before we start. No surprises later.

Dr. Fixit Tile Grout is a cementitious grout for tile joints. It is perfectly adequate outside continuously wet zones — but in a shower or a pool a cementitious grout is porous, and porous grout passes water into the bed however good the waterproofing beneath it.

Leakproofs by Betterwork specifies and applies Dr. Fixit Tile Grout as part of a complete waterproofing system. A material on its own does not stop a leak — what stops it is the right material chosen for the right defect, on a surface that has been properly prepared. That is why we deep-scan before we specify.

Brand
Dr. Fixit
Product type
Cementitious tile grout
Chemistry
Polymer-modified cementitious
Form
Powder, site mixed
Surfaces
Ceramic, Vitrified, Porcelain
Applications
Tiling, Bathroom, Kitchen
Dr. Fixit Tile Grout applied during waterproofing work
Dr. Fixit Tile Grout in use — applied to the manufacturer’s specification.

Where Dr. Fixit Tile Grout is used

This product is specified for tiling, bathroom, kitchen.

  • Tile joints in kitchens, living areas and general wet-adjacent floors
  • Bathroom floors and walls outside the shower zone
  • Balcony and terrace tiling
  • General tiling where chemical resistance is not required

Suitable substrates: Ceramic, Vitrified, Porcelain.

How it is applied

Mixed to a smooth consistency, worked fully into the joints with a rubber float, and the excess cleaned off before it sets hard. Joints are cleaned out to a consistent depth first — a grout line that varies in depth cures unevenly and cracks at the shallow points.

Preparation is the part that decides whether the system lasts. Loose material and failed old coatings are removed, cracks are cut and filled, and the surface is cleaned and brought to the moisture condition the product requires before anything is applied. Skipping that stage is the single most common reason waterproofing fails in its first season, whichever brand is on the tin.

Key properties

  • Polymer modified for reduced shrinkage and better adhesion
  • Available in a range of joint widths
  • Suitable for floors and walls
  • Economical for general tiling
  • Porous — specify epoxy grout in showers and pools

Technical data

Pack sizes, coverage, cure times, colours and current pricing for Dr. Fixit Tile Grout are taken from the manufacturer’s current technical data sheet.

Formulations, pack sizes and regional availability change, so we quote against the data sheet in force on the day rather than a figure copied from a website. Ask us for the current TDS and SDS for this product and we will send them with your estimate.

Related waterproofing services

We apply Dr. Fixit Tile Grout as part of the following services:

Free inspection & written estimate

Get Dr. Fixit Tile Grout specified for your building

Book a free deep-scan inspection. We identify what is actually causing the leak, then recommend the material system that fits — with a fixed written estimate before any work begins.

Dr. Fixit and its product names are trademarks of their respective owner. Leakproofs by Betterwork is an authorized Dr. Fixit applicator. Product information on this page is provided to help you choose a system; always refer to the manufacturer’s current technical data sheet before use.

How we carry out the work

  1. 1

    Free site inspection

    An engineer visits at a time that suits you, examines the affected area and traces where the water is actually entering.

  2. 2

    Diagnosis & written estimate

    You get a clear explanation of the cause, the treatment we recommend, and a fixed written price before any work begins.

  3. 3

    Surface preparation

    Cracks are cut and filled, loose material removed and the surface cleaned. Skipping this is why most waterproofing fails.

  4. 4

    Application & curing

    The chosen system is applied in the specified number of coats, with the correct curing time allowed between each.

  5. 5

    Water testing & handover

    We flood-test or water-test the treated area, walk you through the result, and issue your warranty document.

Our clients

Trusted by leading companies across Pune & PCMC

IT, automobile, FMCG, pharmaceutical, construction and architectural clients.

  • IT & Technology
  • Automobile
  • FMCG
  • Pharmaceutical
  • Construction & Infrastructure
  • Architects & Consultants

Got a leak? Book a free site inspection.

Our engineers assess the source of the leakage, explain the right treatment, and give you a written estimate — with no obligation.

Explore everything we do

Every service, treatment and locality we cover across Pune & PCMC.

Call Now WhatsApp
I need waterproofing
10+ years across Pune & PCMC
10+ years across Pune & PCMC Trained in-house crews — 25+ professionals, not subcontracted labour.

Free inspection

Get a Quote in 30 Seconds

Tell us where the leak is. We will call you back and book a free deep-scan inspection — no obligation.











    Indian mobile number, 10 digits, no spaces.




    We reply within one working day. Your details are used only to contact you about this enquiry.

    Prefer to talk? +91 96376 90999