Dr. Fixit Epoxy Grout
Chemical-resistant epoxy grout from Dr. Fixit — specified and applied by Leakproofs by Betterwork, with a 10-year warranty on eligible work.
- Free site inspection
- Written estimate
- Warranty-backed work
-
Warranty-backed
Written warranty on every completed treatment.
-
Root-cause repair
We trace the source, not just the visible patch.
-
Fixed written quote
Priced before we start. No surprises later.
Dr. Fixit Epoxy Grout is a non-porous, chemical-resistant grout for swimming pools, showers and any tiled surface in continuous water contact — the situations where a cementitious grout is the weak point in an otherwise sound waterproofing system.
Leakproofs by Betterwork specifies and applies Dr. Fixit Epoxy Grout as part of a complete waterproofing system. A material on its own does not stop a leak — what stops it is the right material chosen for the right defect, on a surface that has been properly prepared. That is why we deep-scan before we specify.
- Brand
- Dr. Fixit
- Product type
- Chemical-resistant epoxy grout
- Chemistry
- Epoxy resin
- Form
- Two or three component, site mixed
- Surfaces
- Ceramic, Vitrified, Porcelain, Stone
- Applications
- Tiling, Swimming pools, Bathroom, Kitchen

Where Dr. Fixit Epoxy Grout is used
This product is specified for tiling, swimming pools, bathroom, kitchen.
- Swimming pool tanks and surrounds
- Shower enclosures and wet rooms
- Water tanks and water features with tiled finishes
- Commercial kitchens and areas needing chemical resistance
- Tiled areas requiring a hygienic, non-absorbent joint
Suitable substrates: Ceramic, Vitrified, Porcelain, Stone.
How it is applied
Mixed strictly to the supplied ratio and worked into the joints, with excess removed promptly — epoxy grout is far less forgiving than cementitious grout about being cleaned off after it has begun to set. Work is planned in smaller areas so cleaning keeps pace with grouting.
Preparation is the part that decides whether the system lasts. Loose material and failed old coatings are removed, cracks are cut and filled, and the surface is cleaned and brought to the moisture condition the product requires before anything is applied. Skipping that stage is the single most common reason waterproofing fails in its first season, whichever brand is on the tin.
Key properties
- Non-porous, so joints do not absorb water
- Chemical and stain resistant
- Hygienic and easy to clean
- Suited to permanent water immersion
- Demands disciplined mixing and prompt cleaning
Technical data
Pack sizes, coverage, cure times, colours and current pricing for Dr. Fixit Epoxy Grout are taken from the manufacturer’s current technical data sheet.
Formulations, pack sizes and regional availability change, so we quote against the data sheet in force on the day rather than a figure copied from a website. Ask us for the current TDS and SDS for this product and we will send them with your estimate.
Related waterproofing services
We apply Dr. Fixit Epoxy Grout as part of the following services:
Free inspection & written estimate
Get Dr. Fixit Epoxy Grout specified for your building
Book a free deep-scan inspection. We identify what is actually causing the leak, then recommend the material system that fits — with a fixed written estimate before any work begins.
Dr. Fixit and its product names are trademarks of their respective owner. Leakproofs by Betterwork is an authorized Dr. Fixit applicator. Product information on this page is provided to help you choose a system; always refer to the manufacturer’s current technical data sheet before use.
How we carry out the work
-
1
Free site inspection
An engineer visits at a time that suits you, examines the affected area and traces where the water is actually entering.
-
2
Diagnosis & written estimate
You get a clear explanation of the cause, the treatment we recommend, and a fixed written price before any work begins.
-
3
Surface preparation
Cracks are cut and filled, loose material removed and the surface cleaned. Skipping this is why most waterproofing fails.
-
4
Application & curing
The chosen system is applied in the specified number of coats, with the correct curing time allowed between each.
-
5
Water testing & handover
We flood-test or water-test the treated area, walk you through the result, and issue your warranty document.
Our clients
Trusted by leading companies across Pune & PCMC
IT, automobile, FMCG, pharmaceutical, construction and architectural clients.
- IT & Technology
- Automobile
- FMCG
- Pharmaceutical
- Construction & Infrastructure
- Architects & Consultants
Explore related services and areas
Our services
- Terrace Waterproofing
- Roof Waterproofing
- Bathroom Waterproofing
- Wall Waterproofing
- Basement Waterproofing
- Water Tank Waterproofing
- Balcony Waterproofing
- Swimming Pool Waterproofing
Specialist treatments
- Terrace Waterproofing
- Bathroom & Toilet Waterproofing
- Basement & Underground Tank Waterproofing
- External & Internal Wall Leakage Treatment
- PU & Epoxy Coating Waterproofing
- Injection Grouting (Pressure / Chemical)
- Dampness & Seepage Treatment
- Monsoon Pre-Inspection & Leakage Detection